You are here:
  • Increase font size
  • Default font size
  • Decrease font size

Diakom-Auto

Ремонт и настройка диагностических приборов.

BP-1400/84

PDF

1410/84 TECHNICALSPECIFICATIONS

 

BP-1400/84


General
Operating Voltage:
100-240 VAC
Frequency:
50-60 Hz
Current Rating:
4-2 A (Fuse 250V 6A SB)

Dimensions: 11.75” (298mm) x 8.65” (220mm) x 4.68” (119mm)
Mass: 7.22 lbs. (3.28 kg)

Software
Required:
BPWin
File Type:
including, but not limited to, binary, Intel, JEDEC, Motorola, POF, RAM, straight hex, Tekhex, Extended Tekhex, ASCII hex, Formatted Binary (.DIO), AFM, OMF, LOF
Device Commands:
blank, check sum, compare, options, program, test, verify
Features:
data editor, revision history, session logging, on-line help, device and algorithm information

Hardware
Calibration:
automatic self-calibration
Diagnostics: pin continuity test, RAM, ROM, CPU, pin drivers, power supply, communications, cable, calibration verification timing, ADC, DAC
PC System Requirements:
Microsoft Windows 2000 or above

PIN Drivers
Quantity:
84-pins standard
Analog Slew rate:
0.3 to 25V/µs
Vpp Range: 0-25V
Ipp Range:
0-70mA continuous, 250mA peak
Vcc Range: 0-12V
Icc Range: 0-1A
Very low voltage: to 2.4V (Vdd)
Rise Time: 4ns
Overshoot: none
Protection: overcurrent shutdown, power failure shutdown
Independence: pin drivers and waveform generators are fully independent and concurrent on each site

Standard Accessories Included
software on CD-ROM
user manual on CD-ROM
power cable
data cable
3-year hardware warranty

Features
File Loading:
automatic file type identification; no download time because programmer is PC controlled; supports Intel, JEDEC, Motorola S-record, POF, straight hex, hex-space, Tekhex, and other file formats
Device Selection:
intelligent device selector allows you to type as little or as much of the part number as you like then choose from a list of devices matching your description
Devices Supported:
including, but not limited to, Antifuse, Low Voltage, PROM, EPROM, EEPROM, Flash
EEPROM, Microcontrollers, SPLD, CPLD, FPGA
Continuity Test:
each pin, including Vcc, ground, and signal pins, may be tested before every programming operation
Protection:
overcurrent shutdown; power failure shutdown; ESD protection, reverse insertion, banana jack for ESD wrist straps
Options:
available Socket Modules including, but not limited to, Universal PLCC, standard PLCC, PGA, CSP, BGA, µBGA, SOIC, QFP, TSOP, LCC, SDIP, PCMCIA, SIMM—JobMaster™ software, and Advanced Feature Software
Programming Yield:
assured by independent universal pin drivers on each socket, short distance from pin drivers to device, and accuracy of waveforms
Algorithms:
all algorithms are manufacturer approved or certified (if required)—BPM Microsystems has an excellent record of being first to provide certified algorithms for new devices
Algorithm Updates:
software updates are available throughout the year


 

Меню пользователя

/.WWW-hosting/w1134/diakom.ru/www/administrator/components/com_vvisit_counter/helpersPlease reinstall [Vinaora Visitors Counter] component53